Electrical installation handbook (v2) Electrical devices

  DOWNLOAD :   http://dl.irpdf.com/ebooks/Part10/www.irpdf.com(4491).pdf   ...

IP69K

German standard DIN 40050-9 extends the IEC 60529 rating system described above with an IP69K rating for high-pressure, high-temperature wash-down applications. Such enclosures must not only be dust-tight (IP6X), but it must also able to withstand high-pressure and steam cleaning. The test specifies a spray nozzle that is fed with 80 °C water at 8–10 MPa (80–100 bar) and a flow rate...

Enclosure Design Requirements

  Copyright http://www.hoffmanonline.com/stream_document.aspx?rRID=237450&pRID=237449 ...

IEC standards for HV/MV Panelbords

...

Corrosive environment

ISO 12944 Classification        Typical Environments C1                                           Heated buildings/neutral atmosphere C2      ...

Specifier Handbook A Consultant's Guide for Choosing the Right Enclosure

DOWNLOAD :   https://www.hammfg.com/files/literature/spec.pdf   ...

ENCLOSURE DEFINITIONS AND CLASSIFICATIONS (GALCO)

DOWNLOAD : http://www.galco.com/techdoc/wieg/pb4s_ts.pdf   ...

Enclosure for potentially explosive atmospheres

What is ATEX?    It is a term commonly used to describe potentially explosive atmospheres (ATmosphères EXplosibles in French) and standards for protection systems and equipment.    Two European directives, ATEX 99/92/CE and ATEX 94/9/CE, and international...

Control Panel - Technical Guide - How can the deterioration of electrical equipment installed in an outdoor enclosure be prevented?

DOWNLOAD :   http://download.schneider-electric.com/files?p_Reference=CPTG004_EN&p_EnDocType=Technical%20leaflet&p_File_Id=18000086&p_File_Name=CPTG004_EN+%28web%29.pdf   ...

ASTA Type Test Certification

ASTA Type Test Certificates provide authoritative objective evidence that your bespoke equipment is compliant to relevant safety standards. The certificate can be used for supporting technical files related to CE Marking for the European Union. ASTA Type Test Certification is best suited for low volume or ‘bespoke’ equipment. ASTA Type Test Certification provides you with an independent...

Salt mist test

This test serves to demonstrate that under the influence of a saline atmosphere no damage (corrosion) is caused to the components of the equipment under test and no functional affections occur. This test is only performed on products which are to be installed on the open deck area. ...

Cold & Damp Heat test

Cold This test serves to demonstrate that under the influence of cold no damage is caused to the equipment under test and no permanent or temporary malfunctions occur. 5.1 Test procedure Basis: IEC publication 60068-2-1 – Test A): for products inside the ship – Test B): for products on the open deck or in cold areas. 5.2 Test conditions The functional tests are...