Welding standards (ISO)

International Organization for Standardization (ISO) has developed over 18500 standards and over 1100 new standards are published every year. The following is a partial list of the standards specific to welding: Standard Number            Description ISO 2553              ...

Regulations for the Installation of Electrical Wiring, Electrical Equipment and Air Conditioning Equipment (Qatar General Electricity & Water Corporation "KAHRAMAA")

    DOWNLOAD : http://www.km.com.qa/sitecollectiondocuments/service%20regulations/en/regulationsfortheinstallationofelectricalwiringele.pdf ...

Type of standards (IEC/NEC) for low voltage electrical installations.

  ...

Electronic starters and variable speed drives Schneider-electric Cahier technique no. 208

DOWNLOAD : http://www2.schneider-electric.com/documents/technical-publications/en/shared/automation/automation-information-networks/ect208.pdf ...

ABB Guide to variable speed drives

DOWNLOAD : http://www05.abb.com/global/scot/scot201.nsf/veritydisplay/d3c711ec2acddb18c125788f002cf5da/$file/ABB_Technical_guide_No_4_REVC.pdf   ...

Electrical Switchboard Routine Tests

Physical Check ·         Visual check for any physical damages on the enclosures, paint removal and breakage on components ·         Paint shade as per the approved drawings. ·         Cable feeding provisions ·        ...

Electrical Testing of Low Voltage Switchgear, Panelboards & Switchboards (PEARL)

This "How To" electrical testing document is based on PEARL Reconditioning Standard Section 1300, Revision 5 Low Voltage Panelboards, Switchboards & Switchgear, and discusses relevant test equipment as well as suggested procedures and practices to ensure the quality, safety, and speed of your test-for-reconditioning practices. Introduction: The section of the PEARL Reconditioning...

Electrical Safety Testing Reference Guide

DOWNLOAD :   http://www.psma.com/ul_files/forums/safety/estguide2.pdf   ...

Electrical installation handbook (v2) Electrical devices

  DOWNLOAD :   http://dl.irpdf.com/ebooks/Part10/www.irpdf.com(4491).pdf   ...

IP69K

German standard DIN 40050-9 extends the IEC 60529 rating system described above with an IP69K rating for high-pressure, high-temperature wash-down applications. Such enclosures must not only be dust-tight (IP6X), but it must also able to withstand high-pressure and steam cleaning. The test specifies a spray nozzle that is fed with 80 °C water at 8–10 MPa (80–100 bar) and a flow rate...

Enclosure Design Requirements

  Copyright http://www.hoffmanonline.com/stream_document.aspx?rRID=237450&pRID=237449 ...

IEC standards for HV/MV Panelbords

...